Qualified Installer Dashboard
skyBeacon App Configuration
A video walkthrough of the skyBeacon mobile application.
- Configure Aircraft Information
- App settings and options
- Monitor Screen
Adjusting the Transponder Threshold
Adjustment process for the transponder threshold. The transponder threshold is critical to passing PAPR reports. High percentage Mode 3/A failures can be resolved by adjusting this value.
|skyBeacon Installation QI Training Guide||1||5/2/2019|
|QI Guide to Understanding PAPR Failures||1||5/2/2019|
|FAA PAPR Users Guide||1||5/2/2019|
|Documents for FAA and Aircraft Records||1||5/2/2019|
|Strobe Wiring Configuration||1||5/2/2019|
|skyBeacon Software Upgrade to ADS-B 1.4.0||1||8/15/2019|
|Tips for a Successful skyBeacon Flight||1||5/2/2019|
|skyBeacon Logo – Color||1||7/9/2019|
|skyBeacon Logo – White||1||7/9/2019|
|tailBeacon Logo – Color||1||7/9/2019|
|tailBeacon Logo – White||1||7/9/2019|
|skyBeacon TSO Illuminated||1||5/8/2019|
|uAvionix Logo 1500×603||1||5/2/2019|
|uAvionix Logo 1024×433||1||5/2/2019|
|uAvionix Logo 800×318||1||5/2/2019|
|Wing Tip Adapter 1||1||5/2/2019|
|Wing Tip Adapter 2||1||5/2/2019|
Frequently Asked Questions
- Companion Products
- FAA Requirements
- Testing and Verification
No, you do not need the internet or an internet connection while configuring the skyBeacon. The “Wi-Fi” connection is simply a radio signal that connects the skyBeacon application on your mobile device to the skyBeacon. You will see a warning of “no internet connection,” but that doesn’t matter because you are not trying to connect to the internet; you are using the Wi-Fi radio signal as a connection for the mobile app to communicate with the skyBeacon.
In some cases with certain devices, the mobile data feature must be disabled to configure the skyBeacon. Some devices like the Motorola Moto lineup frequently display this behavior. We are tracking this issue and working on a resolution. To option to disable Mobile Data is found under Setting on most devices. Refer to your mobile device documentation for more information.
Installing the skyBeacon on an aircraft not listed on the AML is approved by the FAA. A field approval is not required. Under the FAA Memo titled “Installation Approval for ADS-B OUT Systems,” the FAA explains that after an STC is achieved for ADS-B OUT equipment, additional installations can be accomplished on aircraft not listed under the AML STC by an A&P with Inspection Authorization (IA) so long as the installation does not require airframe modification.
The certified skyBeacon is eligible for the FAA rebate. In order to select the skyBeacon you’ll need to set the data link option on the rebate form to UAT, and choose uAvionix skyBeacon TSO as the ADS-B transmitter. An example of the rebate form is shown below.
skyBeacon is designed to be a direct replacement for the common navigation light or nav/strobe found on many aircraft. skyBeacon has the form factor and installation characteristics of a traditional Grimes style teardrop shaped wingtip navigation light.
skyBeacon is a direct replacement for the lights shown below (as an example).
After the outer cover screw is removed the mounting base for the lights shown above will have the same 3 hole mounting pattern as skyBeacon. See installation manual for full details.
We do not currently recommend skyBeacon be installed on aircraft with fuel tanks commonly referred to as tip tanks which were popular additions to some aircraft. Tip tanks or other large obstructions on the wing may negatively impact GPS performance. For guidance on fitment and installation submit a photo of your wingtip along with the year, manufacturer and model to firstname.lastname@example.org
It is recommended that you download the skyBeacon installation and user instructions and carefully check the installation template with the aircraft prior to purchase ensuring that the skyBeacon will fit your aircraft.
The installation manual is available here:
The installation mounting template is available here:
We do not currently recommend skyBeacon be installed on aircraft with fuel tanks commonly referred to as tip tanks which were popular additions to some aircraft. Tip tanks or other large obstructions on the wing may negatively impact GPS performance. For guidance on fitment and installation submit a photo of your wingtip along with the year, manufacturer and model to email@example.com.
What do you mean by tip tank?
There has been some interpretation on forums of what we mean by tip tanks. The image below is the type of obstruction we are referring to:
What about integral tanks in the wingtip?
Wingtips with normal profiles are fine for skyBeacon. The integral tanks on most Piper aircraft are not a concern and should be compatible with skyBeacon.
If your wingtips or lighting configuration are not supported by the skyBeacon you have a few options…
The port (left) 301 fairing is now available. Please note the following list assumes the factory wingtip configuration.
This adapter left-hand (port) (UAV-1002301-001) allows installation of the skyBeacon TSO on the following Cessna aircraft:
|182F, 182G, 182H, 182J, 182K, 182L, 182M, 182N|
|185, 185A, 185B, 185C, 185D, 185E, A185F|
The port (left) 302 fairing will begin shipping early 2019.
This adapter (UAV-1002302-001) allows installation of the skyBeacon TSO on the following Cessna aircraft:
|172L, 172M, 172N, 172P, 172Q, 172R, 172S|
|182P, 182Q, 182R, 182S, 182T, R182, T182, TR182|
|185, 185A, 185B, 185C, 185D, 185E, A185F|
The tailBeacon ADS-B out solution is now available for Experimental aircraft. A TSO version is also planned for release. The tailBeacon is a direct replacement for the common rear position light.
Install alternate wingtips:
There are several wingtip manufacturers offering Cessna and Piper wingtips to improve performance and support new lighting configurations. In many cases, new wingtips can lower your stall speed and add tangible performance improvements. One such manufacturer is Stene Aviation.
Experimental Aircraft: Yes
Light Sport Aircraft: With manufacturer approval.
Certified Aircraft: You cannot install skyBeacon unless you have Inspection Authority for your aircraft. We recommend you contact an avionics installation facility or your regular Inspection Authorization (IA). Most IAs, aircraft maintenance facilities, and/or repair stations are also qualified to install skyBeacon. Please note that the installation must be tested to verify proper configuration and operation.
For certified aircraft, the skyBeacon and tailBeacon TSO units must at the very least be installed by an Airframe and Powerplant mechanic (A&P) and the installation must be reviewed and approved (signed off) by an IA. Part 145 shops and facilities with avionics expertise will optimize timely installation and downtime in addition to reducing overall cost.
The skyBeacon has been designed to be a simple installation. Please see the Installation Manual and Pilot’s Guide for full instructions. The installation process is to first remove the existing left-hand wingtip light. Connect the skyBeacon using the three wires as per the installation instructions and use the three screws to attach the skyBeacon to the wingtip. After the mechanical installation is completed the SkyBeacon must be configured using the SkyBeacon mobile application for Android or iOS.
A typical skyBeacon installation will take an installer around 1 hour – this is the time taken for the physical installation of the skyBeacon to the aircraft and the paperwork needed to sign off the installation. Please note that all aircraft are different, especially older aircraft that have been modified for other STC’s. This can potentially affect the installation time. This is why it is extremely important to discuss the installation with a certified avionics shop or A&P or IA.
Once the skyBeacon has been installed it is required that the equipment be tested to show it meets the FAA requirements for ADS-B OUT. An Operational Flight Evaluation (often referred to as a performance flight) must be performed and verified by the FAA. Additionally, the installer may verify performance on the ground using an ADS-B ramp test set.
Ramp Test Equipment (ref. section 91.407(c)). Use ramp test equipment (e.g. Aeroflex IFR6000) to verify proper system configuration and compliance with section 91.227 equipment performance requirements.
Operational Flight Evaluation: See next FAQ titled: What does the Operational Flight Evaluation Consist Of?
To summarize the requirements of AC20-165B (see links below): The performance flight should take place for a minimum of 30 minutes from wheels up. The aircraft should climb to 3,000’+ AGL and perform a minimum of 2 360 degree turns in each direction. Banks in excess of 30 degrees and extreme maneuvers and attitudes should be avoided. Any climb or descent should be a minimum of 1 minute in length. The area of flight should have excellent radar and ADS-B coverage. A map of the current ADS-B coverage at various altitudes AGL is located here: https://www.faa.gov/nextgen/programs/adsb/ICM/
Operational Flight Evaluation. Conduct an operational flight evaluation (OFE) per
section 91.407(b) and request an FAA ADS-B compliance report. Reports are available from:
Flight profile guidance is provided in section 4.3.2 of AC 20-165B: https://www.faa.gov/documentLibrary/media/Advisory_Circular/AC_20-165B.pdf
The ADS-B OUT alteration must be documented in the aircraft maintenance record per section 43.9(a) and include the statement, ·’The installed ADS-B OUT system was shown to meet the equipment performance requirements of 14 CFR section 91.227.”
Yes, the position lights need to remain switched on during all operations. Removing power from the position lights also removes power from skyBeacon and/or tailBeacon. According to 91.225(f) “Each person operating an aircraft equipped with ADS-B Out must operate this equipment in the transmit mode at all times.”
The certified skyBeacon and tailBeacon feature a unique password secured configuration interface via Wi-Fi. A user must enter the password to change the device configuration including the aircraft ICAO and callsign. The password is unique to the device, and once configured, cannot be reconfigured for another aircraft without that password. The password is essentially an anti-theft key, and should be kept secure with aircraft record. There are no external markings or indications on the skyBeacon or tailBeacon to indicate the password.
uAvionix will be able to provide the password if lost provided proof of purchase can be validated.
Yes, skyBeacon will meet the 2020 ADS-B requirements when paired with an operational Mode C or Mode S transponder. skyBeacon meets or exceeds all required performance and environmental standards for use in the national airspace. The certified skyBeacon will ship with 5 separate TSO certifications.
UAT Transmitter: TSO-C154c Class B1S
WAAS GPS: TSO-C145d Class Beta I
Altitude Encoder: TSO C88b
Position Light: TSO-C30
No, skyBeacon transmits on UAT (978MHz). The UAT (978MHz) frequency is only approved for use in the United States below FL180 (18,000′). For international travel or flight above FL180, a 1090ES transponder is required.
All skyBeacon products now ship with an LED strobe. Note: Early experimental versions of skyBeacon did not have the strobe installed.
At this time there is not a wingtip mounted version with integrated rear position lights in development.
There is a replacement rear position light without strobe in development under the working name tailBeacon.