UNLOCK THE POWER OF ADS-B

GENERAL AVIATION SOLUTIONS DESIGNED FOR PILOTS BY PILOTS

Automatic Dependent Surveillance-Broadcast

What is ADS-B?

ADS-B improves situational awareness and traffic management by broadcasting an aircraft’s position and receiving real-time data from other aircraft and ground stations. While ADS-B Out is required in most controlled airspace, ADS-B In remains optional.

AUTOMATICDoes not require ground radar.
DEPENDENTRelies on aircraft navigation systems, typically GPS
SURVEILLANCEProvides position, velocity, and identification information.
BROADCASTContinuously transmits data to anyone equipped to receive it.
ADS-B OUT refers to an aircraft’s ability to broadcast it’s position, altitude, ground speed, and other data to receivers, either on the ground or in other aircraft.
ADS-B IN refers to the receiving of broadcasts from other aircraft which helps give pilots better situational awareness. It also enables aircraft to receive data including traffic (TIS-B), weather (FIS-B), and position reports from other ADS-B equipped aircraft.

 

CUTTING THROUGH THE NOISE

Why is ADS-B useful?

ADS-B has become a critical tool in today’s cockpit—giving pilots a real-time view of nearby traffic and weather that simply wasn’t possible before. More air traffic means more complexity, and ADS-B helps cut through the noise.

IS ADS-B BETTER THAN RADAR?

Generally, yes in several ways. Because ADS-B is automatic at once per second, it can deliver precise tracking of aircraft, unlike radar technology that can take from 5-12 seconds for a sweep. Radar also gets more inaccurate the farther you are away from it, and is more expensive than ADS-B to deploy and maintain.

ADS-B allows airspace participants to have situational awareness which is not true of Radar systems unless TCAS systems are installed. For pilots who prioritize safety, awareness, and informed decision-making, it’s a game-changer.

FAA Mandate

Regulations for ADS-B

IN THE UNITED STATES, ADS-B OUT IS REQUIRED WHEN FLYING IN:

  • Class A airspace where Instrument Flight Rules (IFR) flights only are permitted
  • Class B and Class C airspace where IFR and Visual Flight Rules (VFR) flights are permitted
  • Class E airspace above 10,000 ft where IFR and VFR flights are permitted, and all flights receive traffic information where practical
    (Only IFR flights are provided with air traffic control service, and separated from other IFR flights)
  • Within 30 nautical miles of certain major US international airports

Note: Regulations above are for the US only.

See and be seen

Awareness goes both ways

ADS-B Out makes your aircraft visible to UAS traffic equipped with ADS-B In, helping them stay clear of you. When you fly with ADS-B Out, you’re not just compliant you’re visible—and visibility is safety.

All DJI and Autel models above 249g have ADS-B receivers natively, and aftermarket ADS-B receivers are popular for certain platforms. The FAA has approved many BVLOS shielded operations, as well as First Responder BVLOS operations on the premise of staying close to infrastructure combined with an ADS-B receiver.

1090 Mhz Es & 978 Mhz UAT

How to equip ADS-B Out

1090 MHZ ES

(for global & Class A compliance)

All 1090 MHz ADS-B Out systems operate through a Mode S transponder using Extended Squitter (ES), meaning the ADS-B signal is essentially an enhanced transmission from the transponder itself.

There are two common ways to equip your aircraft with 1090 MHz ADS-B Out:

  1. Integrated Solution: A modern Mode S transponder with built-in ADS-B Out capability.
  2. External GPS Upgrade: An older Mode S transponder can be upgraded by adding a compliant GPS position source.

In both cases, the transponder does the talking—ADS-B just makes it smarter and more visible in today’s airspace

978 MHZ UAT

(for domestic use below FL180)

978 MHz ADS-B Out (UAT) doesn’t replace your Mode A/C transponder—it works alongside it.

UAT systems broadcast GPS-based position and flight data, but still rely on your transponder or encoder for pressure altitude. That means a UAT alone doesn’t meet transponder requirements in controlled airspace—you’ll still need a transponder where one is required.

COMPLIANCE MADE SIMPLE

ADS-B Out Solutions

978 MHz UAT

1. SKYBEACON

The skyBeacon is a 978 MHz UAT ADS-B Out solution that replaces your left wingtip nav light—no panel cuts or rewiring needed. With an integrated WAAS GPS and LED nav light, it pairs with your existing transponder and is TSO certified for straightforward compliance.

2. TAILBEACON

The tailBeacon offers the same trusted performance as the skyBeacon, but installs in the tail position light. It’s a 978 MHz UAT solution with integrated WAAS GPS and LED lighting, compatible with your existing transponder, and is fully TSO certified.

1090 MHz ES

3. TAILBEACONX

The tailBeaconX is a 1090 MHz Mode S ES ADS-B Out unit that installs in the tail light position—no separate transponder required. With integrated GPS, LED lighting, and diversity capability, it’s controlled via the AV-30-C and ready for global operations. TSO certified and built for high-altitude, high-traffic environments.

4. ECHOESX

The echoESX is a compact TSO certified 1090 MHz ES ADS-B Out unit designed for experimental aircraft. It slides into your existing transponder tray, uses the current antenna, and is controlled by the AV-30-E or AV-20-E. It’s Just add an external WAAS GPS and you’re good to go.

SITUATIONAL AWARENESS AT YOUR FINGERTIPS

ADS-B In Solutions

1. SKYSENSOR

The skySensor is a dual-band ADS-B In receiver that installs in place of your right nav light—pairing perfectly with the skyBeacon. It receives both 978 MHz and 1090 MHz signals, including TIS-B traffic and FIS-B weather, and streams them via Wi-Fi to your favorite EFB apps like ForeFlight. With AV-Link, you can also display traffic directly on the AV-30-C for an integrated panel experience.

2. SENTRY & SENTRY PLUS (VIA FOREFLIGHT)

Sentry and Sentry Plus are portable, dual-band ADS-B In receivers built in collaboration with ForeFlight. These all-in-one devices include GPS, AHRS, and a CO detector, and wirelessly stream traffic and weather to your iPad or iPhone. AV-Link support lets you display traffic right on the AV-30-C, offering flexible situational awareness.

BRING YOUR PANEL INTO THE FUTURE

Panel Integration

1. AV-30

Bring modern instrumentation to your legacy panel. The AV-30 replaces traditional attitude or heading indicators with a display that shows attitude, heading, GPS track, and more. It’s fully compatible with tailBeaconX and other uAvionix systems—making it a powerful, upgrade-ready solution for experimental or certified aircraft.

2. AV-Link

AV-Link is the wireless bridge that connects your AV-30 to uAvionix ADS-B In receivers like skySensor and Sentry. It enables traffic display directly on the AV-30, plus over-the-air updates and wireless setup. With AV-Link, your panel gains real-time traffic without the need for a tablet—boosting situational awareness right where you need it

CONFIGURATIONS

ADS-B OUT (TRANSMITTERS)
ADS-B IN (RECEIVERS)
ADS-B TRAFFIC DISPLAY
skyBeacon / tailBeacon TSO
978 MHz UAT Transmitters
(Works with Existing Mode C Transponder)
For Certified and EXP Aircraft in US

skySensor TSO
(Wingtip Installed for Cert or EXP)

or


Sentry Mini | Sentry | Sentry Plus
(Portable Solution - Cert or EXP)
AV-30 via AV-Link
or ForeFlight (iPad/iPhone)
tailBeaconX TSO
Mode S 1090ES Transponder
(Meets Space-Based Requirements)
For Certified and EXP Aircraft
AV-30 via AV-Link
or ForeFlight (iPad/iPhone)
**AV-30 = tailBeaconX Control Head
echoESX EXP
Mode S 1090ES Transponder
For EXP Aircraft only | TSO/STC Pending
AV-30-E via AV-Link
or ForeFlight (iPad/iPhone)
**AV-30-E = echoESX Control Head
* For operation outside the United States, please see the SkyEcho2, dual-band ADS-B In/Out Portable w/ FLARM
** AV-30-C is the Control Head for tailBeaconX and echoESX in certified installs. For Experimental installs, use AV-30-E or AV-20-E.

Why pilots choose uAvionix

You can choose your own adventure—whether that’s ADS-B Out only or a full In/Out setup. uAvionix solutions deliver broad capability under $3,000, with some installs that can take less than an hour.

Systems like tailBeaconX offer future-proof, globally compliant performance, while flexible integration with panel displays (AV-30) or EFBs ensures you stay connected and situationally aware, no matter how you fly.

Evolving with your flight plan

uAvionix is pushing the boundaries of cockpit innovation— making advanced panel capabilities more accessible than ever for both certified and experimental aircraft.

New developments are set to elevate the AV-30’s functionality even further, with enhanced traffic and terrain awareness, electronic conspicuity, and smarter situational displays. Ongoing collaboration with top EFB and avionics partners ensures seamless compatibility and future-ready performance. It’s all part of uAvionix’s mission to deliver powerful, affordable avionics that evolve the way you fly

Fly with confidence

uAvionix delivers a complete, scalable suite of ADS-B solutions tailored to the needs of general aviation. From plug-and-play ADS-B Out devices like skyBeacon and tailBeacon, to intelligent ADS-B In receivers like skySensor and Sentry, and full panel integration via AV-30 and AV-Link, pilots now have access to safetyenhancing situational awareness—on panel, in hand, and in the air.

Stay Connected

uAvionix Insights

"*" indicates required fields

This field is for validation purposes and should be left unchanged.
Select