Primary Features
Additional Features
Transform your panel without sacrificing simplicity.
FAA Approved
Fully certified to meet FAA standards, ensuring reliability and compliance with aviation safety regulations. AV-20-S is also an FAA-Approved clock for both VFR and IFR aircraft.
Avoid Stalls During Critical Phases of Flight
The AV-20 alerts you visually and aurally if you approach a dangerous AoA during critical phases of flight such as landing approach.
Internal Battery
Includes a backup power source that ensures functionality and timekeeping even during power interruptions.
Bundles
You’re In Control with the AV-20
AV-20-E + echoESX Bundle
tailBeaconX TSO + AV-20-E Bundle
Packages
Add Outside Air Temperature (OAT) to Your AV-20
FAQ’S
Knowledge Base
- Aircraft Compatibility
- FAA Requirements
- Installation
- Operation
- Maintenance
- Troubleshooting Tips and Tricks
-
-
What types of aircraft is the AV-20-S compatible with?
The AV-20-S is suitable for installation in Part 23 Class I and II aircraft as outlined in its NORSEE certification.
-
-
-
Is the AV-20-S FAA approved?
Yes, the AV-20-S is FAA approved under the NORSEE (Non-Required Safety Enhancing Equipment) policy, ensuring it meets high safety and performance standards.
-
-
-
What is involved in installing the AV-20-S?
The AV-20-S is designed for easy installation in a standard 2” instrument hole, with minimal aircraft modification required. Detailed installation guidelines are provided in the AV-20 Installation Manual.
-
-
-
How do I configure the display settings on the AV-20-S?
The AV-20-S features a user-friendly interface that allows pilots to customize display settings including brightness, audio alerts, and more directly through the unit’s setup menu.
-
-
-
What maintenance does the AV-20-S require?
Regular maintenance includes checking the internal battery and ensuring that the software is updated. Refer to the Pilot’s Guide for detailed maintenance instructions.
-
-
-
What should I do if the AV-20-S is not displaying correct information?
Ensure the unit is properly calibrated, especially for AoA and G-meter functionalities. If issues persist, consult the Troubleshooting section of the Pilot’s Guide or contact uAvionix support for assistance.
-
Documentation
AV-20 Manuals & Guides
-
Technical Specifications
Specification Value Input Voltage Nominal +10 to +32 VDC Input Voltage Max +60 VDC Input Power Nominal 3 Watts (0.25Amps @ 12VDC) Input Power Max 6 Watts (0.50 Amps @ 12VDC) Required Circuit Breaker 1 Amp Operation on Battery 30 Minutes (Standard 15°C Env) Physical Attributes Mounting Configuration 2 ¼” Round Instrument Hole Dimensions wo/Connector 2.4 x 2.4 x 1.2 Inches Weight 0.25 Lbs. Electrical Connector 9 Pin Male D-Sub Pneumatic Connectors ¼” OD Quick Connect Mounting (4X) #6-32 Machine Screws Case Material High Impact ABS Plastic Environmental Operating Temp -20°C to +55°C Storage Temp (48 Hrs) -30°C to +80°C (Via Analysis) Humidity (48 Hrs) 90% RH (Via Analysis) Display Diagonal Size 1.8” Contrast Ratio (Typical) 500 Brightness (Typical) 1000 cd/m2 Viewing Angle Left/Right 60° Viewing Angle Up 45° Viewing Angle Down 10° Backlight Lifetime (Typical) 50,000 Hrs -
AV-20-S Documentation (NORSEE Certified)
-
AV-20-E Documentationn (Experimental Aircraft Only)
-
Service Bulletins
-
Downloads
-
Additional
Resources
Documentation



