Your Shopping Cart
ping978EC
SKU: UAX-90139-01
$2,200
Sorry, this product is not available in your country. Please contact a uAvionix reseller for orders in your region or contact us.
Primary Features
-
Broadcasts ADS-B Out on 978MHz UAT
Designed to support Electronic Conspicuity requirements of UK BVLOS UAS market.
-
Dynamically generates non-ICAO Self-Assigned 24-bit Aircraft Address
Complies with UK CAA CAP 1391 and CAP 3040 Electronic Conspicuity requirements for BVLOS UAS.
-
Integrated SIL 1/SDA 1 GNSS and Barometric Sensor
Precision navigation and altitude reporting with fault detection to protect against GNSS jamming and anomalies
-
Dual Link ADS-B Detection
Real-time tracking of aircraft on both 1090MHz and 978MHz within 100 mile radius.
1 / 4
Additional Features
Enhanced Performance & Reliability
Ultra-Lightweight
Only 26 grams, minimal impact on your payload capacity. ping978EC is 22 grams (26 grams with antenna
Rapid GNSS Fix
Battery-backed GNSS for a swift Time-to-First-Fix (TTFF).
High-Dynamic Range Receiver
Ensures consistent performance in dense airspace environments.
Hear what our partners are saying about ping978EC
Partner Testimonial
FAQ’s
Knowledge Base
- Aircraft Compatibility
- UK CAA Requirements
- Installation
- Operation
- Maintenance
- Troubleshooting Tips and Tricks
-
-
What types of UAS can use ping978EC?
ping978EC is suitable for all Specific Category unmanned aircraft operating in the UK that need to meet CAA BVLOS UAS Electronic Conspicuity regulations.
-
-
-
Does ping978EC meet UK CAA Specific Category BVLOS UAS requirements?
Yes, it complies with CAA ADS-B performance standards, including CAP 1391 Appendix E and RTCA DO-282B.
-
-
-
How should I mount the ping978EC unit?
Mount securely to a flat surface with clear sky visibility for the GNSS antenna, avoiding signal-blocking materials like carbon fibre.
-
Can I use my own antenna?
If you prefer not to use the supplied antenna then only antennas certified to TSO-C66, TSO-C74, TSO-C112 with a peak gain ≤4 dBi and VSWR ≤1.8 at 978MHz are approved.
-
-
-
How is ping978EC powered?
Powered with 11-28V DC. Connect using the provided power harness.
-
How do I configure ping978EC?
Configure using the uAvionix Ping Installer app via the Ping Programmer connected through Wi-Fi.
-
-
-
What regular maintenance does ping978EC require?
Minimal maintenance; periodic checks recommended to ensure antenna integrity and device performance.
-
-
-
My device isn’t connecting to the app—what should I do?
Ensure correct Wi-Fi connection (Ping-XXXX), using password “uavionix”. Confirm the Ping Programmer is properly connected.
-
ADS-B traffic isn't appearing on my autopilot—what should I check?
Verify serial port configuration on your autopilot matches ping978EC protocol settings: MAVLink2, baud rate 57600.
-
Unboxing Video
Documentation
ping978EC Manuals & Guides
General Documentation
Ping Installer Mobile App
Owners of the uAvionix Ping line of devices can use this free application to install and configure their hardware.
Supported device(s) include:
- ping978EC
- ping2020i
- ping1090i
- ping200S
- ping20S
Note: this application is not intended to directly configure pingBuddy or pingEFB, but does work in concert with pingBuddy to configure pingNAV and other products.
Request a quote
Get the right solution for your mission—fast. Fill out the form below, and uAvionix will provide more information about tailored solutions and pricing.