Description:
AV-30-E Software v3.0.0 implements the following changes:
  • Add rate of turn and standard rate bank angle indicators.
  • Add ability to disable unneeded pages to installation menu.
  • Add ability to connect an AV-Link directly to AV-HSI, providing traffic and updates to all connected AV-30s. Note: to update an AV-30 from an AV-HSI requires this software to be installed directly into the AV-30 first. Future AV-30 releases will be able to use this shared update feature.
  • Add VSI overlay onto MFD.
  • Add rate of climb (ft/nm) overlay.
  • Add max-G and min-G textual overlays. Added max and min indicators to G-Load graphical overlay. Added reset to Setup menu.
  • Add ability to connect NMEA GPS directly to AV-HSI and serve to all connected AV-30s.
  • Add low and high voltage indication to alert pilot of charging system problem.
  • Fix waypoint drawing bugs in DG arc view when used with Garmin 296/396/496 or Apollo GX, and Avidyne IFD series GPS.
  • Fix waypoint drawing to display active (magenta) segment on top of overlapping route segments.
  • Improve AHRS performance in turbulent flight.
  • Add simulated traffic to MFD demo mode.
  • Add OFF option for Set Altitude to improve interaction with Aerocruze autopilot.
  • Add GPS “MSG” annunciator for ARINC 429 navigators connected with AV-HSI.
  • Add squawk overlay and push-set option to CDI mode.
  • Improve AV-MAG calibration accuracy.
  • Update overlay color scheme in Legacy UI style so GPS-derived data is magenta.
  • Update Squawk entry timeout behavior. Squawk will set if pressing done or letting the menu timeout.
  • Make font size and style consistent for no data “—” indications in overlays.
  • Long-hold of center knob when OBS set is active will sync to current bearing across all AV-30 using AV-HSI.
  • Add navigation mode annunciation to bottom of DG arc pages.
Products Affected:
AV-30-E (UAV-1004035-001, UAV-1004035-002, UAV-1004035-003)  running firmware 2.6.0 and earlier