I have the GRT SafeFly2020 and echoUAT combo with a GRT EFIS and my PAPR has lots of errors

If you get SIL, SDA and NIC errors on your PAPR it is likely that the GRT is not set up properly. Make sure these values are entered in the GRT under General settings/TT22/echoUAT:   GRT EFIS TT22/EchoUAT Settings: DU-SF Communication (Status) Verify “Yes” SF-echoUAT Communication Verify “OK” Remote Status Verify “OK” External GPS Communication [...]

2020-06-10T14:34:22-05:0005/26/20|

echoUAT Transponder Threshold Adjustment

Adjusting the threshold value on the echoUAT can improve the performance of the transponder monitor.  uAvionix does not recommend changing the value unless directed to do so by uAvionix. The threshold value adjusts the sensitivity of the echoUAT transponder monitor.  Higher values reduce sensitivity, lower values increase sensitivity. To modify the threshold value perform the following steps: [...]

2020-05-04T17:33:44-05:0005/04/20|

Tips for a Successful tailBeacon/skyBeacon Flight

It’s all about the setup: In aviation, everything is about the setup.  The preflight, the pilot’s health, the pilot’s familiarity with the aircraft, and the details of the flight determine 99% of the outcome.  ADS-B evaluation flights are no different.   Poor behavior and a lack of understanding lead to failed reports, more than a little [...]

2020-06-17T15:12:26-05:0005/04/20|

Title