AV-30-E Service Bulletin Software Upgrade to 2.0.3

Description:

AV-30-E Software v2.0.3 implements the following changes:

• Add traffic display
• Add hour meter – Available on SETUP screen
• Implement magnetic declination correction for BeaconX GPS input
• Add multi-engine support
• Add beep on volume adjust
• GPS Rendering Corrections
• Correct GPS waypoint not always shown on GPS ARC view
• Correct GPS overlay display values to truncate rather than round
• Update textual heading/bearings from 000 to 360
• Correct magnetic variation data as provided by NMEA device
• Aera 660 waypoint artifacts – Internal waypoint data could be corrupted by previous values in the NMEA GPS data processor; systems other than Aera 660 would be affected as well
• Vso/Vs1 configuration – Vs0 and Vs1 were swapped on the airspeed tape
• Add factory default recovery mode – Add ability to reset main board flash, to trigger, at startup, hold encoder and right button
• Reverse zoom encoder rotation on map views – Both GPS TPD and ARC displays have updated the direction of zoom to encoder rotation to align with the
• Traffic display and be more consistent with other products.
• Add “cancel shutdown” message – Update wording on splash screen indicating the user can press a button to cancel shutdown
• Correct range check on IAS trim setup menu.

Products Affected:

AV-30-E (UAV-1004035-001) running firmware 1.1 and earlier