-
ADS-B Out | WAAS GPS | Altimeter | LED Nav Light | LED Anti-Collision (Strobe) The world’s only wingtip-mounted ADS-B OUT solution to meet the 2020 mandate. skyBeacon has the lowest installation cost and largest approved model list of any UAT ADS-B OUT solution. Learn More about skyBeacon -
Out of stock
SkyFYX combines a high precision WAAS GNSS sensor with an integrated RAIM processor. Resilient against jamming, spoofing and GPS range errors, SkyFYX provides reliable navigation in challenging environments. SkyFYX is the most affordable ADS-B rule-compliant position source companion for the echoUAT ADS-B Transceiver. The SkyFYX meets the performance requirements of 14 CFR 91.227. For use in Experimental and LSA aircraft. SkyFYX orders include:- SkyFYX GPS Receiver
- Powered GPS antenna with MCX connector
- Wiring harness
-
ADS-B Out | WAAS GPS | Altimeter | LED Nav Light tailBeacon is the latest all-in-one certified ADS-B solution from uAvionix. Remove your standard rear position light and replace with tailBeacon for ADS-B compliance. Learn More about tailBeacontailBeacon is designed for use in the United States.
-
RAM® suction cup mount with quick release for use with SkyEcho 2. -
The optional sturdy soft-shell molded case easily fits in any backpack or flight bag and features a textured uAvionix logo on the front. EVA foam on the inside is die cut to hold the SkyEcho 2 and RAM Mount. SkyEcho and RAM mount shown in photos are not included. -
The 301 fairing is now available. This adapter (UAV-1002301-001) allows installation of the skyBeacon TSO or skySensor on the following Cessna aircraft:- 150L, 150M
- 152
- 175C
- 180G, 180H
- 182F, 182G, 182H, 182J, 182K, 182L, 182M, 182N
- 185, 185A, 185B, 185C, 185D, 185E, A185F
- P206E, U206E
-
The 302 fairing is now available. This adapter (UAV-1002302-001) allows installation of the skyBeacon TSO or skySensor on the following Cessna aircraft:- 172L, 172M, 172N, 172P, 172Q, 172R, 172S
- 172RG
- 177B, 177RG
- 180J, 180K
- 182P, 182Q, 182R, 182S, 182T, R182, T182, TR182
- U206F, U206G
- TU206F, TU206G
-
Transform your panel without sacrificing simplicity. AV-20-S is FAA APPROVED.
- AoA Display (Voice Alerting & Peaks)
- G-Meter Display (Voice Alerting & Peaks)
- Attitude (Roll / Pitch)
- Slip / Skid Indication (NEW!)
- Clock (GMT / Local)
- Outside Air Temperature (C / F)
- Bus Voltage Display
- Dual User Timers (Count Up / Down)
- Engine Run Timer
- Flight Timer
- Density Altitude Display
- True Airspeed Display (Kts / Mph)
- Internal Battery Operation (30 Min)
-
The easiest and most affordable ADS-B solution is now available to Ercoupe owners! Simply fit the Ercoupe Adapter in place of your existing taillight, attach the tailBeacon mounting ring to the adapter, slide in tailBeacon, and give it a turn. Now you’re ready to fly into 2020. There have been several permutations of the Ercoupe tail cone. Not all Ercoupe models are supported. Customers have reported success with the following aircraft models:Ercoupe 415CErcoupe 415CDErcoupe 415DErcoupe 415EErcoupe 415GForneyF1F1ALimited stock available -
SkyFYX combines a high-precision WAAS GNSS sensor with an integrated RAIM processor. Resilient against jamming, spoofing, and GPS range errors, SkyFYX provides reliable navigation in challenging environments. SkyFYX is the most affordable ADS-B rule-compliant position source companion for the echoUAT ADS-B Transceiver. The SkyFYX meets the performance requirements of 14 CFR 91.227. For use in Experimental and LSA aircraft. SkyFYX-EXT orders include:- SkyFYX GPS Receiver with integrated antenna
- Integrated wiring harness
- Mounting Hardware
-
The optional echoUATmux harness allows echoUAT to support a GTX327/GTX330 with a separate serial altitude encoder. Icarus, Garmin/Trimble, Northstar, Magellan formats are currently supported. The harness allows plug and play connectivity to aircraft previously wired for the Navworx ADS600EXP with the Garmin 327 and 330 transponders. The echoMUX can still be used if you did not previously have a Navworx system. If you have the Garmin GTX327 or GTX330 transponder PLUS a serial altitude encoder you can use this harness. The echoMUX has a male DB9 connector on it so you will need to supply a female DB9 for the wired connections to the transponder and the altitude encoder. -
Upgrade your legacy vacuum-driven instruments to digital precision attitude and directional gyro customizable displays.
- Primary Attitude
- Primary Slip
- Primary Direction Indication
- Probeless Angle Of Attack
- Indicated Airspeed (KTS/MPH)
- Altitude / Vertical Trend / Alerter
- +8 / -8 G-Meter
- OAT / TAS / Density Altitude
- Bus Voltage
- GPS Navigational Data Overlay
- GPS HSI / 360 Rose / Arc Map Mode
- Customizable Colors, Fonts, & Layout
- Audio Alerts (AoA, G, Roll Limits)
- 2 Hr Typical Internal Battery Operation
