Note this process is only applicable to specific units, there is no need to perform these steps unless directed by uAvionix. To update the pingEFB PID/VID perform the following steps: For Windows Users: 1. Download FT Prog http://www.ftdichip.com/Support/Utilities.htm#FT_PROG 2. Install FT Prog by launching the downloaded installer. 3. Download the pingEFB Template here: https://uavionix.com/downloads/pingefb/PingEFB-FTDI.xml (Right Click [...]
Applies to: ping200S ping200Si/Sr ping20S The ping200S Control Application allows users to test ping200S functionality by sending commands to the ping transponders over RS-232 to from a Windows PC. A serial connection to the transponder is required. Ping20XS Control Application Ping200S Control Application Guide
Information on updating the EchoUAT through a wireless connection using a laptop.
Download the latest Wi-Fi software for pingProgrammer. pingProgrammer Wi-Fi Software Connect your PC to the current pingProgrammer Wi-Fi by connecting to the current network SSID. Open a web browser and access the pingProgrammer at http://192.168.4.1/update If the page does not load confirm you are connected to the pingProgrammer Wi-Fi. [...]
Download the latest Wi-Fi software for EchoUAT EchoUAT Wi-Fi Software Connect your PC to the Echo Wi-Fi by connecting to the Ping-XXX network and if required enter the passphrase uavionix (all lowercase). Open a web browser and access the EchoUAT at http://192.168.4.1/update If the page does not load confirm you [...]
1. Connect Ping USB to a Windows PC. 2. Download the ping installer. https://uavionix.com/downloads/pingusb/Software/PingUSB_v_1_0_6.zip 3. Extract (unzip) the pingUSB installation software. 4. Run the pingSetup.msi and follow the on-screen setup. 5. Download Virtual Radar Server for Windows. http://www.virtualradarserver.co.uk/Download.aspx 6. Run VirtualRadarSetup.exe and complete installation of Virtual Radar Server. [...]
Download the appropriate transceiver software for echoUAT echoUAT Transceiver software version:2.4.66 Released 4/1/2024 FOR USE WITH THE echoALT OR OTHER APPROVED ALTITUDE ENCODERS ONLY! echoUAT Transceiver software version:2.4.43 Released 4/9/2019 Fixes to optimize performance in high traffic enviroments 2.4.15 Released 1/22/2018 Properly displays invalid baro altitude as "--" instead of zero in the mobile [...]