Why doesn’t the Monitor screen in the mobile app reflect the changes I’ve made?

In some cases with certain devices, the mobile data feature must be disabled to configure the skyBeacon.  Some devices like the Motorola Moto lineup frequently display this behavior.  We are tracking this issue and working on a resolution.  To option to disable Mobile Data is found under Setting on most devices.  Refer to your mobile [...]

How is the installation tested to ensure it meets the FAA Requirements?

Once the skyBeacon has been installed it is required that the equipment be tested to show it meets the FAA requirements for ADS-B OUT. An Operational Flight Evaluation (often referred to as a performance flight) must be performed and verified by the FAA.  Additionally, the installer may verify performance on the ground using an ADS-B [...]

2019-01-29T15:19:25-07:00August 9th, 2018|, , |

What does the Operational Flight Evaluation consist of?

To summarize the requirements of AC20-165B (see links below):  The performance flight should take place for a minimum of 30 minutes from wheels up.  The aircraft should climb to 3,000’+ AGL and perform a minimum of 2 360 degree turns in each direction.  Banks in excess of 30 degrees and extreme maneuvers and attitudes should [...]

2019-01-29T15:19:37-07:00August 9th, 2018|, , |